Home And Garden

DIY Rustic Planked Ceiling

Per week ago I discovered an incredible salvage/lumber yard near our home and picked up an enormous rough cut wood plank to sand, stain, and cut to size for our office desk. We truly hooked up many of the planks with finishing nails, so the holes have been very small. Or if you happen to’re okay with a wooden looking material, James Hardie makes different patterns of grain and a few completely different kinds of panels and planks, i.e. flat and beaded edge. Rammed earth is an earth-primarily based wall system product of compacted gravel, sand, and clay; that is extraordinarily sturdy and durable.

We face nailed nailed by way of the floor of our tung and groove planks to the existing ceiling – at the studs – with a nail gun and just puttied the little holes later. Do not use a drum sander which might tear up any wooden floor if you are not careful. You can also add beams, comprised of thicker items of pine or vintage wooden to the ceiling.

So we now have one coat of paint on the partitions and woodwork and two coats on the completed ceiling. Mine is more of a galley, however I will nonetheless do the prepping before the ceiling goes up — thanks! The planks are manufactured in the U.S.A. from a naturally grown, sustainably harvested, and perpetually renewing resource – timber. The room to the fitting gives the basic mahogany hearth mantel and surround full with a tiled fireplace, a flat display screen tv set after which for the crowning of the room – the country, rough hewed wood beans.

Leave a Reply